FORA-PILOT
Drilling Parameters Measurement System (DAC TEST)
INDUSTRY 4.0 READY
The system allows to measure and store the following parameters
PERFORATION PHASE
- Perforation depth
- Advance speed
- Rod torque rotation (bar and N*m)
- Case torque rotation (bar)
- Rotation Speed
- Drilling fluid Pressure (air or water)
- Thrust Infeed force (bar and N)
- Rotation gear detection
- Rotary engine gear detection
- Specific energy (J/m3)
- Clam status
FORA PILOT can also manage all the usual operation needed during the job, like hole flushing or changing of the rods. The central unit includes a push-button to disable depth measuring when the change of the drill rod is required. This changes of the rod can also be performed automatically using a pressure switch.
FORA PILOT can be programmed to calculate the Drilling Energy complex parameter (SED) during the perforation, starting from the single measured parameters. SED is very usefull to understand soil type found during the perforation and to take geological considerations during the drilling phase.
Data can be simply downloaded from FORA PILOT to PC using a standard USB stick. You can show graphics of the data and print it using a simple software called VISUAL-SGD installed into a standard PC. With this software we can also decide what we want to insert in the print report and what we don't want to show VISUAL-SGD is also usable to check data acquired in order to perform a quality check of the job for each drilling performed.
The parameters can also be displayed on the customer's fleet management portal, where all the customer's devices along with their locations, acquired datasets, and a real-time telemetry dashboard can be viewed.
Main technical characteristics
- 10” touchscreen display
- USB slot used to download data stored
- Mechanical protection: IP65 (DIN40050)
- Power: 24 V dc (18-36V), 50 W
- Working temperature range: -20° C +60° C
- Connector oriented design
FORA PILOT is already equipped with the capability to be connected to a 3G, or wireless or ethernet network using our BOX ETHERNET option, and it could be remotely monitored giving the chance to load programmed drills into the system, download data collected or run maintenance tests and procedure. BOX ETHERNET can also have an integrated GPS sensor to identify the positioning of the drill with metric precision.
